The Satcube Portable Ku Band Satellite Terminal can pack down into a small roller bag for incognito transportation and logistics, avoiding unwanted eyes and scrutiny. The Satcube Portable Ku Band Satellite Terminal’s intuitive user interface enables you to get connected to high-speed satellite broadband in just few minutes.
WEIGHT: 23 kg
DIMENSIONS: 70 × 40 × 25 cm
DETAILS
The Satcube Portable Ku Band Satellite Terminal enables users to create an easy to use Wi-Fi hotspot and get high-speed broadband connection in less than a minute to execute critical on-the-spot work assignments and communications.
The Satcube Portable Ku Band Satellite Terminal is highly suitable for a wide range of users, such as broadcast media, emergency response, law enforcement, public safety organisations, telemedicine, NGO´s, corporate executives and more.
The Satcube Portable Ku Band Satellite Terminal can pack down into a small roller bag for incognito transportation and logistics, avoiding unwanted eyes and scrutiny.
The Satcube Portable Ku Band Satellite Terminal integrates with the iDirect IQ 200 (Evolution and Velocity), Newtec MDM2510 and UHP 210 satellite modems enabling the terminal to be used on a variety of VSAT hub infrastructure.
Satcube Portable Ku Band Satellite Terminal Features:
- Weighs only 8 Kg
- All-in-one compact carry on satellite terminal with a flat antenna in the size of a large laptop
- Support high speed internet connections up to 20 Mbps
- Tapping next-generation High Throughput Satellites (HTS) and wide-beam Ku
- Rapid setup in under 1 minute
- Easy to use (even our boss can set it up without instructions)
- A highly intuitive user interface makes operation as simple as using a smartphone
Satcube Portable Ku Band Satellite Terminal Specifications:
- Dimensions: 470 / 300 / 55 mm
- Data Rate: 5/2Mbps or 10/3Mbps on our SkyMove broadband service
- Polarisation: Linear Horizontal / Vertical
- User Interface: High contrast display
- Total Weight: 10 kg
- EIRP: Typical 46 dBW
- IP Rating: IP65
- G/T: 9 dB/K
- Power Requirement: 24 VDC
- Batteries: 3 hours transmit time (three batteries), hot swappable
- Frequency Band: Tx 13.75 – 14.50 GHz | Rx 10.95 – 12.75 GHz
- Operating Temperature: -20ºC (4ºF) to 50ºC (122ºF)
- Power Consumption: 130 W
- Interfaces: 2 x LAN, 1 x USB host, WLAN Access Point (IEEE 802.11 b/g)
- AC/DC Power Pack/Battery Charger Consumption: 100 – 240 VAC, 47 – 63 Hz, 150 W
- Type Approvals: CE/ETSI [RED directive (2014/53/UE), EN 301 428)] | FCC [FCC IDENTIFIER: 2AUV4SATCUBEKU]
- Approved Modems: iDirect IQ 200 modem, Newtec MDM2510 modem and UHP 210 modem
